Wave Interference Lab: Make Waves Reinforce, Cancel or Stand Still

  • Explore interference, cancellation and standing waves in an exact analytic plane-wave simulator.
  • Compare moving displacement, steady amplitude envelopes and normalized mean-square signal.
  • Inspect a point and its horizontal slice, share an exact moment or save an original wave card.

Two waves share the same space. Sometimes they reinforce each other. Sometimes their displacements cancel. Send identical waves in opposite directions and their combined pattern can appear to stand still.

ContentBASE Wave Interference Lab turns those ideas into an interactive wave simulator. Change direction, phase and amplitude, then switch between the moving field and the steady pattern behind it.

Wave Interference Lab

Explore two coherent plane waves, compare cancellation and standing waves, and inspect a precise mean-square signal. JavaScript loads this interactive tool near its position in the article.

1. Two Waves, One Shared Space

Wave A always travels to the right and has amplitude 1. Wave B has an adjustable direction, relative phase and amplitude. Both waves use the same wavelength and wave speed, so they have the same frequency.

These are coherent plane waves: straight wavefronts extending across an infinite mathematical plane, with a fixed relative phase. The rectangular picture is a window onto that plane. Its edges are not walls.

At every point, the lab adds the two instantaneous displacements. It evaluates exact trigonometric expressions rather than approximating ripples through a time-stepped water model.

Original ContentBASE Wave Interference Lab artwork showing diagonal reinforcement and cancellation bands from two coherent plane waves.

2. Change the Relationship Between the Waves

Use the direction slider to turn wave B counterclockwise from 0° to 180°. At 0°, it travels alongside wave A. At 180°, it travels directly against it.

The phase slider shifts wave B within its cycle. A 180° relative phase means the opposite displacement for otherwise identical parallel waves.

Amplitude controls wave B’s size relative to wave A. A value of 0 removes its contribution. A value of 1 makes the amplitudes equal.

Changing wavelength or wave speed affects both waves. Frequency is speed divided by wavelength; period is the reciprocal of frequency. The counters show those relationships in invented world units and model seconds.

Slider changes are staged. Choose Apply setup & restart to apply them at model time zero. The new setup opens paused so you can inspect the first frame.

3. Three Views Explain Different Things

  • Wave motion: instantaneous signed displacement, from −2 to +2.
  • Amplitude envelope: the largest displacement magnitude reached at each point over a cycle, from 0 to 2.
  • Mean-square signal: cycle-average squared displacement relative to one wave alone, from 0 to 4.

The last two views stay fixed while time advances. The waves keep oscillating underneath that steady spatial structure.

Each mode keeps a fixed colour scale. A change in colour therefore reflects a change in the displayed value rather than an automatic rescaling that makes every setup look equally dramatic.

4. Try Perfect Reinforcement and Cancellation

Perfect reinforcement aligns equal waves travelling in the same direction with zero relative phase. Their combined displacement has twice the amplitude of either wave alone.

Perfect cancellation keeps the equal parallel waves but shifts wave B by 180°. Their sum becomes zero throughout the field.

That result depends on matching amplitudes. Choose Unequal cancellation to make wave B half as large. The residual envelope is 0.5, and its normalized mean-square signal is 0.25. Opposite displacement does not erase a larger wave completely.

5. Make a Standing Wave

The Standing wave preset sends equal waves in opposite directions. Fixed locations repeatedly reach zero displacement, while the regions between them oscillate.

Switch to Amplitude envelope to see the stationary pattern. Switch back to Wave motion and advance by a quarter period to inspect how the displacement changes within it.

This model has no string endpoints or reflecting walls. It demonstrates the superposition that creates a standing wave, without imposing a finite instrument’s allowed resonance modes.

6. Follow the Interference Bands

In the crossing-wave setup, reinforcement and cancellation vary across diagonal bands. Changing the crossing angle changes their spacing.

The reported fringe spacing is measured perpendicular to the bands, rather than along whichever direction happens to be horizontal on the screen. For angle θ and wavelength λ, it is λ / (2 sin(θ/2)).

Parallel waves have no spatial interference bands. With wave B turned off, there is also no two-wave band pattern to measure.

7. Probe a Point and Inspect a Slice

Click the field to move the probe, or enter x and y coordinates and choose Move probe. The world’s centre is (0, 0); positive x points right and positive y points up.

The probe reports wave A, wave B, their instantaneous sum, the envelope and normalized mean-square signal. The horizontal slice uses the probe’s y coordinate and plots both individual waves and their sum on one displacement scale.

Colours and line styles distinguish the profile curves. The vertical probe line connects its chosen x coordinate with the numerical measurements.

8. Squared Signal Is a Specific Measurement

The lab’s mean-square signal is the average of the squared combined displacement over a full cycle, divided by the corresponding average for wave A alone. In this model, that equals the square of the envelope.

One wave alone therefore measures 1. Two perfectly reinforced waves measure 4. Equal parallel waves with opposite phase measure 0.

This is a squared-displacement measurement. To infer physical energy flow, you also need a medium and its energy equations. An ideal standing wave can have a spatially varying displacement envelope while carrying zero net energy in either direction.

9. Model Time Keeps Moving in the Background

The lab limits the applied playback rate when necessary to target twelve redraws per oscillation at the measured visible screen cadence. It shows both the requested and applied rate. This also applies to the moving profile beneath a static envelope or mean-square field. Background time continues at the applied rate; a hidden-tab redraw interval does not slow that clock.

The playback control sets model seconds per real second. Each session stops at 60 model seconds. The quarter-period button advances by a frequency-dependent fraction of one oscillation, rather than an arbitrary fixed time.

Elapsed time continues when the page loses focus. Because the field has an analytic solution, the lab can directly evaluate the correct later moment when the browser resumes drawing.

An explicit pause remains paused. Shared views and devices requesting reduced motion start paused; choose Play when ready.

10. Share This Exact Wave Moment

Copy this view preserves the applied wave settings, model time, display mode and probe coordinates. The link opens paused at the captured moment, making a particular cancellation pattern easy to inspect.

Preview or save a labelled 1500×1000 wave card, or save the field alone as a 900×600 image. Field images are sampled directly at their export resolution and omit the interactive probe marker.

Calculations, links and images are created locally. The tool does not upload your view or save a remote simulation session.

11. Explore More Mathematical Motion

Grow evolving concentration patterns in Reaction–Diffusion Lab, compare almost identical pendulums in Chaos Lab, or connect local steering rules with collective movement in Flocking Lab.

Browse ContentBASE Tools for more interactive experiments with readable controls, documented assumptions and shareable results.


Citations

  1. OpenStax, University Physics Volume 1, section 16.5, Interference of Waves. Primary teaching reference for linear superposition and the addition of coherent sinusoidal waves. ContentBASE independently implements and illustrates the equations. (OpenStax: Interference of Waves)
  2. OpenStax, University Physics Volume 1, section 16.6, Standing Waves and Resonance. Reference for standing waves formed from equal waves travelling in opposite directions. This tool has an infinite plane and does not impose finite-string endpoint resonance modes. (OpenStax: Standing Waves and Resonance)
Cindy, ContentBASE creator assistant

MEET CINDY

Your ContentBASE creator assistant

Cindy helps creators find Canva templates, content ideas, and simple ways to make better social media posts faster.

Want ready-to-use templates? Claim the free Canva bundles or browse the full bundle store.